Our Services
Technical Training free of charge
Multi-day training modules for machine setters and maintenance staff are further customer services in our location. The topics of the basic and advanced courses ranges from introduction of the functioning of the technologies all the way up to practical exercises on our Mars, Jupiter, Venus and Zeres Series. Check out the current course overview further down this page!
In addition, interested companies have the opportunity to receive individual training to develop content together with our instructor. For inquiries about such individual trainings don’t hesitate to contact us.
Jürgen Ledwina
Head of Training Department
Phone.: +49 (0) 9438 / 9439 – 230 / – 212
Fax: +49 (0) 9438 / 9439 – 350
E-Mail: training@haitiangermany.com
At a glance
Courses & Dates 2021
blanc
Zhafir Series for operators
Training target
After the training, you will be able to get along with the HMI, to install a mold and to set the basic values to operate the machine. You are also able to program a sequence, to work with the quality table and to use injection graphics
Program
- General overview of the machine
components, function - General programming of the controller
layout of the HMI - Setting of clamping and injection unit
setting a new mold - Practical exercise on the machine
installing and starting a new mold - Extended programming of the controller
- Setting of an injection curve
parameters, interpretation of the curve - Using the injection graphics
- Setting of the quality supervision
using the quality table - Practical exercise on the machine
Dates
Week nr. 03: 19.01.2021 – 21.01.2021
Week nr. 15: 13.04.2021 – 15.04.2021
Week nr. 23: 08.06.2021 – 10.06.2021
Week nr. 29: 20.07.2021 – 22.07.2021
Week nr. 41: 12.10.2021 – 14.10.2021
Week nr. 48: 30.11.2021 – 02.12.2021
Requirements
Skills in injection molding are welcome.
Teacher
Juergen Ledwina
Location
Ebermannsdorf
Duration
3 day
Minimum participation
4 persons
Participant limit
8 persons
Documentation
Paper and digita
Haitian Series (with Touch-Screens)
Training target
After the training, you will be able to get along with the HMI, to install a mold and to set the basic values to operate the machine. You are also able to program a sequence, to work with the quality table and to use injection graphics.
Program
- General overview of the machine
components, function - General programming of the controller
layout of the HMI - Setting of clamping and injection unit
setting a new mold - Practical exercise on the machine
installing and starting a new mold - Extended programming of the controller
using the sequencer - Setting of an injection curve
parameters, interpretation of the curve - Using the injection graphics
- Setting of the quality supervision
using the quality table - Practical exercise on the machine
loading and adapting of a core program
Dates
Week nr. 03: 19.01.2021 – 21.01.2021
Week nr. 12: 23.03.2021 – 25.03.2021
Week nr. 20: 18.05.2021 – 20.05.2021
Week nr. 26: 29.06.2021 – 01.07.2021
Week nr. 38: 21.09.2021 – 23.09.2021
Week nr. 45: 09.11.2021 – 11.11.2021
Requirements
Skills in injection molding are welcome.
Teacher
Juergen Ledwina
Location
Ebermannsdorf
Duration
3 days
Minimum participation
4 persons
Participant limit
8 persons
Documentation
Paper and digital
Maintenance of electrical machines
Traning target
After the training you will be able to diagnose failure causes and to operate the machine. You know what to take care about during maintenance. You are also able to change components, to calibrate the machine and to interpret fault messages.
Program
- General overview of the machine
components, function - Overview of the programming of the controller
general use - Working with the electrical diagram
- Working with the hydraulic diagram (ZERES Series)
- Taking measurements on the machine
- Using the diagnostic screen
checking of in-/outputs, Euromap-interface - Principle of servo drive
structure and function - Check of toothed belt
condition and tension - Replacement of components
safety relays, controller cards - Calibration of zero-axis
- Practical exercise on the machine
Date
Week nr. 18: 04.05.2021 – 06.05.2021
Requirements
Basic skills in electrics and/or hydraulics are welcome.
Teacher
Juergen Ledwina
Location
Ebermannsdorf
Duration
3 days
Minimum participation
4 persons
Participant limit
8 persons
Documentation
Paper and digital
Maintenance hydraulic machines
Training target
After the training you will be able to diagnose failure causes and to operate the machine. You know what to take care about during maintenance. You are also able to change components, to calibrate the machine and to interpret fault messages.
Program
- General overview of the machine
components, function - Overview of the programming of the controller
general use - Working with the hydraulic diagram
- Taking measurements on the machine
- Using the diagnostic screen
checing of in-/outputs, Euromap-interface, creating a status report - Basic machine maintenance
- Principle of servo pump
structure and function - Replacement of components
safety relays, transducers - Calibration after replacement
layout and function - Calibration of pressure sensor, servo pump and screw speed
- Practical exercise on the machine
Termin
Week nr. 9: 02.03.2021 – 04.03.2021
Requirements
Basic skills in electrics and/or hydraulics are welcome.
Teacher
Juergen Ledwina
Location
Ebermannsdorf
Duration
3 days
Minimum participation
4 persons
Participant limit
8 persons
Documentation
Paper and digita
Send your request – now!
Please specify the desired course name, date and number of persons.